the glossy, mostly clear coating is acrylic conformal coating. I've seen it on a lot of Japanese and one or two American PCBs. I think JP is referring to the thicker brown stuff over the wires in my photos, still present after cleaning off the coating. That stuff looks like the glue often used to hold caps which is typically called Sony bond glue.
Exactly, is correct.
@the nines
Thank you!! Much appreciated. Just picked up the power supply this morning. See how it goes tonight after work.
Thank you!! Much appreciated. Just picked up the power supply this morning. See how it goes tonight after work.
Got the power supply plugged in last night. It was a relief that it turned on and the condition of it, exterior wise, was good.
The 45rpm setting is fine. The 33rpm is off, seems slow. The 78rpm has the problem that I've read elsewhere that it just runs away with speed.
I will open up both the table and power supply and do a visual inspection, then adjust voltages. It will need the caps replaced regardless.
The 45rpm setting is fine. The 33rpm is off, seems slow. The 78rpm has the problem that I've read elsewhere that it just runs away with speed.
I will open up both the table and power supply and do a visual inspection, then adjust voltages. It will need the caps replaced regardless.
- Home
- Source & Line
- Analogue Source
- The Incredible Technics SP-10 Thread